• Home
  • Yamaha DBR12 Powered Speaker

Yamaha DBR12 Powered Speaker

49.00
500.40
        SPECIAL OFFER

          Please select all product options

          Product was out of stock

          share
          Description

          Description

          Yamaha's DBR12 powered speaker ushers in a new era of high-performance, grab-and-go PA. Packing a potent 1,000W amplifier and custom-designed 12" woofer, the DBR12 cranks out a whopping 131dB of full-range sound. Despite its formidable output, this revolutionary speaker tips the scales at under 35 pounds, courtesy of a lightweight yet durable enclosure equipped with ergonomic handles. The DBR12 is Yamaha's most portable powered speaker that harnesses the same cutting-edge DSP and amplification technology as their professional DSR and DXR series.

          High-Efficiency 1,000W Amplifier

          At the heart of the DBR12 is a lightweight, Class-D amplifier that churns out 1,000W of power with remarkable clarity and precision. This high-efficiency design, combined with Yamaha's optimized DSP algorithms, enables the DBR12 to achieve arena-worthy volume levels without sacrificing accuracy or overtaxing its components.

          Custom-Designed 12" Woofer and 1.4" Tweeter

          Yamaha developed the DBR12's woofer and tweeter in-house to deliver the purest, most natural sound possible at any volume. The rigid, high-power woofer pumps out tight, defined bass with minimal distortion. Paired to a 1.4" compression driver and precision waveguide, the tweeter reproduces midrange and high frequencies with stunning resolution.

          Onboard 2-Channel Mixer

          Despite its compact size, the DBR12 incorporates a built-in 2-channel mixer for blending multiple inputs. Channel one features both XLR and 1/4" inputs for microphones and line-level devices. Channel two provides 1/4", RCA and 3.5mm inputs, allowing you to connect everything from keyboards and electronic drums to MP3 players and laptops. Select either the CH1+2 mixed output or CH1 thru output depending on your needs.

          Lightweight, Durable Enclosure

          Yamaha designed the DBR12's plastic enclosure to be as lightweight, portable and road-ready as the components inside. The wedge-shaped cabinet can be set up and torn down in minutes. M8 rigging points allow for permanent installation, while the 50-degree angle provides ideal floor monitor positioning. A rugged steel grille protects the woofer and tweeter and ergonomic handles make transporting the DBR12 a breeze.

          Features

          Speaker configuration
          • Active/passive:Active
          • Type:Two-way full range
          • LF driver:12"
          • MF driver:N/A
          • HF driver:1.4" ferrite driver
          Power
          • Amplifier class:D
          • Wattage:465W RMS, 1000W peak
          • Mixer/preamp:2 Channel
          Audio
          • Frequency response:52Hz - 18kHz
          • Coverage pattern:90 x 60
          • Max SPL:131 dB
          Inputs
          • XLR:2 XLR/TRS
          • TRS:
          • TS:
          • RCA:
          Output/thru
          • XLR: 1 mix output
          • TRS:
          • TS:
          • RCA:
          • SPEAKON:
          Enclosure
          • Cabinet material:Polypropelene
          • Width:14.7"
          • Height:23.7"
          • Depth:13.7"
          • Weight:34.8 lb.

          Specs

          • Type: 2-way, Bi-amp powered speaker, Bass-reflex type:
          • Frequency range (-10dB): 52Hz - 20kHz
          • Nominal coverage, H: 90, V: 60
          • Components: Diameter:12" cone, Voice Coil:2", Magnet:Ferrite
          • HF: Diaphragm:1.4", Type: 1" throat compression driver, Magnet:Ferrite
          • Crossover: 2.1kHz: FIR-X tuning (linear phase FIR filter)
          • Output power: Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W)
          • Maximum output level (1m; on axis): 131dB SPL
          • I/O connectors: INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
          • Processors: D-CONTOUR: FOH/MAIN, MONITOR, OFF
          • Heat dissipation: Fan cooling, 4 speeds
          • Power requirements: 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz
          • Power consumption: 74W(1/8 Power Consumption), 18W(Idle)
          • Cabinet material: Plastic
          • Finish: Black
          • Handle: Side x 2
          • Flying and mounting hardware: Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts)
          • Pole socket: 35mm (Bottom x 1)
          • Dimensions: 376mm (14.8")
          • H: 601mm (23.7")
          • D: 348mm (13.7")
          • Net weight: 15.8 kg (34.8 lbs)
          • Accessories: BBS251, BCS251, BWS251-300, BWS251-400 (Optional Speaker bracket)